|
Enhance your Industrial + Specialty Printing magazine experience by exploring our interactive digital edition. |
|
 |
   |
A combination irradiance and Black Standard Temperature sensor
Atlas Material Testing Technology, manufacturer in weathering technology and services, has designed and introduced a new series of calibration sensors to provide low-cost and precise do-it-yourself maintenance on the SUNTEST Family of xenon instruments.
This latest sensor design allows simultaneous calibration of both light and temperature. By combining two sensors into one device, users can perform two measurements at the same time under identical conditions. This provides a higher level of accuracy, and thus significantly reduces the time required to perform calibrations. In addition, tailored sensor adapters ensure the correct sensor positioning guaranteeing reliable calibration routines.
SunCal sensors are specifically designed to support do-it-yourself calibration routines of all SUNTEST models including the SUNTEST CPS+, XLS+ and XXL+ and are available as SunCal WB300-800 BST, BB300-400 BST and LUX BST.
Accurate irradiance and Black Standard Temperature (BST) control inside of a SUNTEST instrument are critical and the calibration process must be reliable and easy to perform. The new SunCal Sensor Series addresses these needs.
For further information about Atlas products or services, please visit Atlas at www.atlas-mts.com or contact Atlas directly at atlas.info@ametek.de.Atlas® Material Testing Technology LLC
Atlas offers a complete line of instruments and services for accelerated and natural weathering. In addition, the Atlas Consulting Group helps clients from various industries, including photovoltaics, coatings, plastics, textiles, automotive and cosmetics, to develop the best weathering processes for their products.
In November 2010, Atlas joined AMETEK as part of AMETEK Measurement & Calibration Technologies (M&CT), a division of AMETEK's Electronic Instruments Group (EIG) — a leader in advanced monitoring, testing, calibrating and display instruments.
Atlas Material Testing Technology is ISO 17025 and ISO 9001:2008 registered. Atlas products are designed and manufactured to conform to international, national and industry standard test methods including ISO, ASTM, DIN, JIS and numerous others.
Did you enjoy this article? Click here to subscribe to the magazine.